TLC Spot Object

Description:

TLC Lane objects technically have no required properties or objects, but non-zero values for kCDXProp_Height and kCDXProp_Width would probably be helpful.

The kCDXProp_Height, kCDXProp_Width, and kCDXProp_TLC_Tail distances refer to the unrotated reference frame. If the spot's parent TLC Plate is rotated 90°, the Height value will actuall refer to a horizontal distance, and so on.

Spots are displayed as modified ellipsoids. If Height == Width and Tail == 0, then the spot is circular. With Height != Width and Tail == 0, the spot is elliptical. If the Tail value is non-zero, the top half of the spot is drawn as a semiellipse with the height = Height and width = Width, and the bottom half of the spot is draw as a second semiellipse with height = (Height + 2 * Tail) and width = Width.

Subobjects:

Value	Name	CDXML Name
0x8011	kCDXObj_ObjectTag	objecttag
	Arbitrarily named property, one or more of which can be attached to any ChemDraw object.

Properties:

Value	Name	CDXML Name	Type
n/a	n/a	id	UINT16
	A unique identifier for an object, used when other objects refer to it.
0x0011	kCDXProp_Visible	Visible	CDXBoolean
	The object is visible if non-zero.
0x0812	kCDXProp_Width	Width	CDXCoordinate
	The width of an object in CDX coordinate units, possibly in a rotated or skewed frame.
0x0813	kCDXProp_Height	Height	CDXCoordinate
	The height of an object in CDX coordinate units, possibly in a rotated or skewed frame.
0x0A08	kCDXProp_Curve_Type	CurveType	INT16
	The type of curve object. This is a bit-encoded property.
0x0AB0	kCDXProp_TLC_Rf	Rf	FLOAT64
	The Retention Factor (Rf) of an individual spot.
0x0AB1	kCDXProp_TLC_Tail	Tail	CDXCoordinate
	The length of the "tail" of an individual spot.
0x0AB2	kCDXProp_TLC_ShowRf	ShowRf	CDXBoolean
	Show the spot's Retention Fraction (Rf) value if non-zero..